Top 7 Best hinges for toy box (2022)

1. Xntun 4 Pcs 100N /22.5lb Kitchen Cupboard Door Pneumatic Spring Strut, Close Lid Hinge, Down Lid Stay, Safety Lift Support, Toy Box Gas Strut

Check Price

• Pressure:100N/22.5lb (each struts);Compressed Length:7.1 inch; Extended Lenghth:10.5 inch.
• Perfect lid support for supporting the lid to keep it open, support opens lids to a maximum angle of 100 degrees.
• Made of circular metal mounting plate, high quality piston and brass conductor, designed for three screw holes, the installation is more firmer.
• This pneumatic support is could be used for many purposes, suitable for cabinet, cupboard,furniture door, toy box etc.
• Package Included:4 x Gas Struts and 24 x Screws.

2. Gas Spring, Gas Strut, Gas Shocks, Soft Close Hinges, Toy Box Hinges, Lift Supports, Lid Support, Kitchen Cabinet Hinges Hydraulic Support Door Cabinet Hinge Spring, Pressure:120N/26lb/12KG[ 2 Pack ]

Check Price

• ★ Since the gas struts need to be installed by themselves, you should consider whether you can install them independently. It is recommended: one for cabinet door width 600mm/23.6in to achieve parallel opening and closing synchronization. , Choose the model and quantity according to the weight of the actual cabinet door panel. The choice is not soft and hard, and the small one cannot hold the cabinet door, 10N=2.2ib=1KG.
• ★Stable & No Rusty: gas struts is made of copper core with zinc plating, which prevents from rusting even aftering using for a few years.If there is a problem with the product or installation difficulties, please contact customer service as soon as possible to send installation pictures or videos, thank you.Brand: WANLIAN
• ★ Install the nail plate and insert the ball into the plastic hole. You can remove the metal clip with a screwdriver or a screw when you need not to use.*It is suit for heavier kitchen cabinet, bedroom trunks, toy box or storage box under window bench seat as well as folding table for RV.Brand: WANLIAN
• ★ Pressure:120N/26lb/12KG (Per Strut);Length ( hole center to hole center) :9-11/16”;Travel:3-14/25” ,Distance between ball mounts compressed: 6-1/8″. 120N Gas Shocks suit best for the door weight 100N-120N，The door panel weighs more than 26lb, 12KG, it is not suitable for use. It will not be able to be supported, so use two or higher pressure models.Brand: WANLIAN
• ★ 1.The gas spring piston rod must be installed in the downward position, not upside-down, which can reduce friction and ensure the best damping quality and cushioning performance. 2.The gas spring piston rod is strictly prohibited from rotating to the left. If you need to adjust the direction of the joint, you can only turn it to the right. (Avoid the loss of gas in the cavity) 3.The connection point should be installed flexibly without jamming.

3. Morinbo Lid Stay 90 Degree Open with Soft CloseToy Box Hinges, Lid Support Hinges, Heavy Duty Lid Support for Toy Box and Upward Top-Opening Flap Doors, Easy to Install (Pack of 1)

Check Price

• 🌟 GENTLY CLOSE DESIGN – The Lid stay hinge is made of nickel plated steel and plastic, and per lid-stay support the range of door weight 11-13 lbs, Height 18-20 inch.
• 🌟 EASY TO INSTALL – Comes with an exclusive original design installation card, combined with the most detailed installation video of the entire network on this page, allows you to easily complete the hinge installation.
• 🌟 LID STAY SLOW CLOSING – Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers.
• 🌟 HOLDS LID OPEN – The Compact design of lid stay hinge allows these hinges will hold your lid open until you push it down. The lid hinges supports opening the lid at a maximum Angle of 90 degree.
• 🌟 PERFECT AFTER-SALES SERVICE – Regardless of any problems you encounter, please feel free to contact us, If for whatever reason you are unhappy with the product we will refund you, no questions asked! If you need an additional installation instruction card, please feel free to get in touch with us.

4. Douper Toy Box Hinge Soft Close Lid Support Hinge 25lbs-50lbs/ 2pcs Bearing Capacity Safety Hinge Chest Lid Slow Close Do Not Slamming Shut Pack of 2

Check Price

• LID STAY WITH SOFT CLOSE – Excellent safety solution for toy box, chest trunks and kitchen cabinets, your lids will lower slowly and gently to avoid smashing fingers.
• 25lbs – 50lbs WEIGHT CAPACITY RANGE – Douper soft close lid support hinge can support lid weight from 12lbs to 25lbs and lower gently; Weight support will be doubled by using 2 lid supports (25lbs-50lbs)
• 90 DEGREE OPEN ANGLE – The compact design allows for installation in tight fit areas. The lid stay allows the lid to open at a maximum 90 degrees angle.
• ONLY TAKES 5 MINUTES TO COMPLETE THE INSTALLATION by following the install placement measurement card and installation video
• WARM TIPS — Douper hinges will not applicable with the lid at width more than 50in and height over 25inches.

5. Morinbo Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors, Easy to Install (Pack of 2)

Check Price

• STURDY LID STAY WITH SOFT CLOSE 🌟 The Lid stay hinge is made of nickel plated steel and plastic, and per lid-stay support the range of door weight 6-10 lbs, Height 18-19 inch.
• EASY TO INSTALL 🌟 Comes with an exclusive original design installation card, combined with the most detailed installation video of the entire network on this page, allows you to easily complete the hinge installation. Detailed user manual can be downloaded from the Amazon page to let you know more about our product. (User Manual.pdf)
• LID STAY SLOW CLOSING 🌟 Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers.
• COMPACT DESIGN OF LID STAY HINGE 🌟 The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree.
• KEEP LID HINGE STAY OPENING & WIDE USAGE 🌟 Exclusive and original design installation card is included in the product packaging, Easy to follow installation instruction video ensure a perfect install the first time! Lid stay can be installed on the left or on the right.

6. RUYUFE Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors, Easy to Install

Check Price

• STURDY LID STAY WITH SOFT CLOSE– The Lid stay hinge is made of nickel plated steel and plastic, and per lid-stay support the range of door weight 6-10 lbs, Height 18-19 inch.
• LID STAY SLOW CLOSING — Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers.
• KEEP LID HINGE STAY OPENING, WIDE USAGE — Never worry again about having to prop the lid open. This lid support will hold the lid open until you are ready to close. This lid stay is deal for upward opening flaps, such as toy boxes and vanity lids, vertical cabinet doors and storage box, cabinetry, piano or butt hinges.
• COMPACT DESIGN OF LID STAY HINGE — The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree.
• EASY TO INSTALL LID SUPPORT– Updated manual can be downloaded in Amazon page.Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right.

7. Toy Box Hinges Soft Close – APFFSY Lid Support Hinges, Safety Soft Close Hinges for Chest Toy Box, Slow Close Hinges Lid Support Soft Close 105 Degree Open (Pack of 1)

Check Price

• GENTLE SLOW CLOSE HINGES — It’s heavy lid hinge and soft close lid support. Expecially excellent slow close and safety solution on chest hinges, toy box hinges. Lids will go down slowly and gently to avoid slams shut and crush the little fingers of children. Good gift fit for the children’s toy box and chest.
• KEEP LID STAY OPEN — The lid support hinge will hold the lid open until you want to close. Never worry about having to support lid by hand anymore. It’s widely usage as slow close hinges for toy box hinges, chest hinges, also fit for overhead kitchen cupboard, wardrobe lids too.
• SMALL COMPACT DESIGN — The compact design allows for installation in tight fit areas. The lid stay allows the lid to open at a maximum 105 degree angle. Perfect for any lids or flaps when lid support soft close is required.
• EASY TO INSTALL 【 Important：Refer to our video ! 】 — The safety hinges can be mounted on the left or right side, also used for side-mounting and top-mounting. Keep the soft close hinges installed for 75°-105° adjustable opening angles, depending on actual situation. It can fit for most lids.
• REFUND GUARANTEE — If you are not satisfied with your purchase for the toy box hinges soft close any reason, we are pleased to give you 100% money-back. We endeavor to uphold any exceptional services that you have come to expect from us.