Making repetitive cuts on your table saw is a pretty straight forward process. Set your fence and feed each stock piece through the blade to achieve the same size each and every time. What if you need a series of narrow cuts that are about an 2 inches or less in width? Doing this can get tricky since you cant get your hands safely between the blade and the fence. You could always reverse measure and keep the off fall piece, but without a guide of some sort that can be inaccurate.
The Thin Rip Jig acts kind of like a third hand behind the blade or cutter. With the saw unplugged simply measure from the outside of of the blade toward the tip of the (guide roller) Thin Rip Jig for the width cut you want to make. Once set, secure the Thin Rip Jig simply by rotating the large, easy to grip star shaped knob. After your first cut, reset your stock behind the blade and slide the fence over so your stock piece is touching the guide roller on the Thin Rip Jig. Lock the fence.
Making your thin rip cuts in this fashion allows you to cut wider boards down without getting your fingers in harms way by keep them away from the blade or cutter.The Thin Rip works much like a feather except that it doesn’t exert spring like pressure against the board. This means it can be used to make accurate, repetitive cuts since it’s essentially just holding its spot once it is secured.
The Thin Rip Jig has a roller guide bearing on the tip to make feeding your stock through an easy and smooth moving process. The free rotating bearing is made from high quality materials for extended workshop use. The jig fits directly into most any standard 3/8” x 3/4” miter slot. The body is made from a solid piece of aluminum and is adjustable inward and outward from your fence depending on the width of your stock.
The jig can be used on other workshop machinery like router tables with fences and band saws for re-saw applications. In certain cases, when working with larger or longer stock on table saws or router tables, we recommend using two thin rip jigs behind the blade or cutter for extra stability when feeding your stock through.
This saw is made by Thomas Flinn of Sheffield England the last traditional saw and plane maker in the UK.
Saw plate is made from Sheffield allow spring steel and taper ground providing a good balance of edge durability and ease of sharpening.
The saw plate is taper-ground and gets progressively thinner (approx. 0.005 inches) from the teeth to the back of the saw. This greatly reduced binding in the cuts.
Handle is stained European Beech with brass button screws
20” saw plate has 4.5 TPI and filed for rip cutting
Premium TiCo HI-Density Carbide Ripping Blend for Maximum Performance
Extra Large, Flat Tooth Design leaves a smooth finish without the need for sanding or jointing
Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish
Silver Ice Coating resists corrosion and pitch build-up
7. Freud 10″ x 30T Industrial Glue Line Ripping Blade (LM74R010)
Premium TiCo HI-Density Carbide Ripping Blend for Maximum Performance
Heavy-Duty Thick Kerf and Plate ensure a stable, flat blade for long cutting life
Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish
Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.
FAST & UNIFORM LAYOUTS – Speed up any measuring job, with better accuracy! Ideal for repetitive work such as cuts on rafters, stringers, or any type of stairway work
UNIVERSAL FOR ANY SQUARE – Easily clamps to any metal framing, rafter or carpenter squares. An essential woodworking tool – no square should be without a set
DURABLE & RUST RESISTANT – Brass plated steel for lifetime use and rust resistance
EASY TO USE – After measurements, simply tighten the tops onto the square to use as references. The knurled screws allows for fast and easy adjustments
3. POWERTEC 80008 Steel Framing Square with Rafter Tables | 16-Inch by 24-Inch L Shaped Tool – Black
FUNCTION: Commonly used for carpentry, framing, laying rafters and stairs – used to create square and true dimensions for your applications
FEATURES: Steel square profile, optimal visibility, with 1/8, 1/10, 1/12 and 1/16 front and backside stamped graduated scales and conversion tables
APPLICATION VERSATILITY: This universal square measuring layout tool can be used as a straight edge, finding and establishing right angles and marking cut off work on widestock
DIMENSIONS: Frame Square Tool Body 24” long and 2” wide | Tongue is 16” long and 1-1/2” wide | 1/8” thick
4. SWANSON Tool Co., Inc SW1201K Value Pack 7 inch Speed Square and Big 12 Speed Square (without layout bar) ships with Blue Book
MULTIPLE GRADATIONS: Gradations included for marking common, hip, Valley, and jack rafters. Useful for determining and marking angles and making square cuts on boards.
FEATURES: Get more bang for your buck with this value pack of two of our best selling speed squares
DURABLE MATERIAL: Heavy-gauge billet aluminum alloy construction is die-cast for increased accuracy versus laser-etched and extruded stamped rafter squares.
EASY TO USE: When used as a saw guide, the speed square makes truing up a board easy
CLEARLY IDENTIFIABLE SCALE: High-visibility, black gradations with a non-glare, matte finish for easy reading in any lighting conditions
These are a ‘must have’ for any woodwork enthusiast.
Ideal for use with square, round and irregular shaped work pieces , such as Box, Picture Frame, Barrel etc.
They are designed for assembling picture frames, drawers, chair frames or other articles of various sizes and configurations prior to glueing or fixing.
Tension is maintained by means of a handle which tightens the 4 metre long woven canvas strap linked to the tensioning unit.
The corner braces can be removed if you want to use these on irregular shaped objects.
2. 4PCS Woodworking Frame Clip,90 Degree Clamps For Woodworking Right Angle Fixing Clip Hand Tool, For Welding, Wood-Working, Drilling, Making Picture Frames.
Adjustable Corner Clamps: Fit for boards with a thickness of 3/16″ – 3/4″ (5-22mm) and 90 degree corner or t-joints,even apply to assembly two board with different thickness.
High Quality Wood Clamps: The clamps for woodworking are made of good quality of material and it is durable enough to work many times without damage.single handle, adjustable jaws, sturdy, non-slip, for quick set-up and quick fix.
Easy To Use Right Angle Clamp: 4 PCS woodworking clamps sets can be operated with single hand.It allows you to open this clamp with one hand,and hold work pieces together with the other,saving labor time and reduce workload. High spring tension to keep boards in place when screwing or gluing them together.
Multi-Purpose Tools: Perfect gift for your car-own friends and family.perfect for small wood working project,to build wooden boxes,birdhouse,mailbox,dresser drawers assembly, assemble bookshelves,photo frame reinforcement, wooden diy project,etc.
After-sale Guarantee: Offers every customer satisfaction,you can order it without any risks. For any quality issues, please feel free to contact us,we will resend a new or unconditional full refund using a faster shipping method.
3. Corner Clamps Kits 12PCS 60/90/120 Degree Adjustable Angle Clamps Spring Clamp, Single Handle Spring Loaded Multi-function Angle Clamps for Woodworking,Welding, Photo frame fixing, Cabinet making
1.ADJUSTABLE ANGLE: We provide you three different corner clamps,which can satisfied your all needs. Fits for a thickness of 5-22mm boards,uesd for 60/90/120 degree ,T-joints, F-joint and L-joint. Also apply to assembling two boards with different thickness.
2.EASY TO USE: The spring clamp can be operated by single hand.You can open the clamp with one hand,and the other one freely handle other workpiece, which is easy and convenient, saving time and energy.
3.HIGH QUALITY: Woodworking clamps are made of high-quality material, which is light and not easy to damage.The stainless steel spring is smooth and durable, with high elasticity. Can be use for long time.
4.WIDE APPLICATION: The angle clip are widely used, can be used for woodworking,cupboards fixing, furniture repair and photo frame repair fixing, and help you complete various DIY woodworking tasks. Multifunctional and easy to operate.
5.YOU WILL GET: The package includes 4 pcs tool handles, 4 pcs/set angle clamps(4 pcs 60 degree, 4 pcs 90 degree, 4 pcs 120 degree angle clamps), a total of 12pcs angle clamps. For you to use. Suitable for all kinds of woodworking,welding,shelves fixing etc. Please pay attention to the thickness range of the board that can be used by the Angle Clamps.
4. DCT Picture Photo Framing Miter Joint Clamp – Rods, Couplers, Thumb Nuts, and Corners – Woodworking Frame, Box, Cabinet
SAFELY TIGHTEN CORNERS: The DCT Picture Photo Framing Miter Joint Clamp – Rods, Couplers, Thumb Nuts, and Corners – Woodworking Frame, Box, Cabinet is your solution to safely gluing together various sizes of picture frames to produce solid, perfectly square frames free of side frame damage; Tightens all four corners simultaneously and also used to clamp boxes, cabinets, and other furniture
CREATE A VARIETY OF SIZES: Accommodates frames from 2 x 2 inches (5.1cm x 5.1cm) up to 48 x 48 inches (121.9cm x 121.9cm) (with use of the included threaded rod couplers/splicing blocks); 1 rod = 24 inches; Easily clamps all styles of frames and works best for square (perimeter to back) frames, cabinets, or any rectangular or box shape that is being glued together; Developed length of coupled pieces will depend on how much thread you use to screw them into the coupler
EASY TO USE: By measuring the diagonals, you can make adjustments to square things up; 4 rods can be used to clamp anything under 23.5 x 23.5 inches (59.7cm x 59.7cm); 8 rods can be used (4 sets of 2 rods connected with a brass connector) to clamp anything 25.75 x 25.75 inches (65.4cm x 65.4cm) and higher; You can also mix the two to achieve any rectangular size in between
BUILT TO LAST: Plated rods are fully threaded; Thumb nuts turn dials make accurate and easy corner adjustments; L-shaped corners are constructed from solid and beveled die-cast metal; Rod coupler splice extension sleeves are constructed from 7/8-inch long polished brass hexagonal tubing
CONTENTS: Package includes (8) 24-inch rods, (4) coupler extensions, (4) thumb nuts, and (4) corners
5. SEDY Band Clamp, Frame Clamp Quick Release Strap Clamp For Woodworking, Belt Clamp Strap Clamp
❄ These are a ‘must have’ for any woodwork enthusiast.
❄ Ideal for use with square, round and irregular shaped work pieces , such as Box, Picture Frame, Barrel etc.
❄ They are designed for assembling picture frames, drawers, chair frames or other articles of various sizes and configurations prior to glueing or fixing.
❄ Tension is maintained by means of a handle which tightens the 4 metre long woven canvas strap linked to the tensioning unit.
❄ The corner braces can be removed if you want to use these on irregular shaped objects.
Fit for DIY ,Woodworking, fish tank fixing, Picture Frame reinforcement
This clamp with steel threaded vise screws and two countersunk mounting holes for permanent installation on the bench
gluing two boards do not over tighten the joint forcing the glue out of the joint – this will cause a weak joint and you could break or pull the washer out of the clamp
The design use of reinforced connection, which helps to prevent excessive force caused by breaking
7. GoLucky7 Right Angle Clamp, 90 Degrees Corner Clamp, Picture Frame Holder, Glass Holder, DIY Woodworking Hand Tools
Products include: 4pcs/set right angle clamp; Material: Aluminum Alloy with steel screw; Maximum clamping range: 7cm/ 2.75 inches
Each right angle clip workers have been checked, and the lead screw tightening test.
There are tons of applications that this clamp can be used for, some are but not limited to: crafts and projects, engineering, drilling, framing and picture frame creation, arts, cabinet and cupboard fabrication and even metal framing and welding.
This clamp with steel threaded vise screws and two countersunk mounting holes for permanent installation on the bench
Aluminum alloy construction with steel screws. High hardness, will not rust.
Up to 50% thinner head profile than conventional ratchet systems
5° ratcheting arc
Built up to 40% stronger than traditional ratchets by eliminating the drive tang
Pass-Thru ratchet and socket system eliminates the need for deep sockets
11 locking head positions
Dual material comfort grip handle
Includes blow mold case for storage and organization meets or exceeds ASME specifications
Drive Tang Size : 3/8 in.Tooth Count : 72
4. GOSWIFT Pass-Thru Socket Set 3/8-Inch Drive Metric/SAE 13-Piece Go-Thru Socket Wrench Set with Extension Bar and Quick Release Adapter Set with a BMC
Flex socket design provides more access to fasteners in tight confines
Chrome molybdenum alloy steel (Cr-Mo) for exceptional strength and durability
Off-corner loading design for reduced fastener rounding
Manganese phosphate finish to resist corrosion
High-visibility laser etched markings provide quick size identification
Included Components: (1) Each Hex: 1/16 In 5/64 In 3/32 In 7/64 In 1/8 In 9/64 In 5/32 In 3/16 In 7/32 In 1/4 In 5/16 In 3/8 In 2Mm 2.5Mm 3Mm 4Mm 5Mm 6Mm 7Mm 8Mm 10 Mm Phillips: #1 #2 #3 Slotted: 1/8 In 3/16 In 1/4 In Torx: T8 T10 T15 T20 T25 T27 T30 T40 T45 T47 T50 T55
The adapter allows you to use GearRatchet with standard square drive sockets
Pass-Thru ratchet & socket system eliminates the need for deep sockets
Up to 40% stronger by eliminating drive tang and up to 50% thinner than conventional ratchet systems
Tooth Count : 72
7. KING 13-PC Pass-Through Spline Socket Set, Adapter for 1/4″ and 3/8″ Drive, 72 Tooth Reversible Pass-Through Ratchet, Spline Geometry Works with 6 Different Fasteners
Cascade Complete ActionPacs have 25% more Cleaning Power* *% cleaning ingredients vs. Cascade Original
Dissolves fast and releases the grease-fighting power of Dawn
Powers away even 24-hour stuck-on messes for a complete clean. No pre-wash needed
Convenient, premeasured ActionPac with no finicky wrapping. Phosphate free
Use with Cascade Power Dry Rinse Aid and Cascade Dishwasher Cleaner for our best clean
Save up to 15 gallons of water per dishwasher load when you skip the pre-wash and run your dishwasher with Cascade Platinum
#1 Recommended Brand in North America* *More dishwasher brands in North America recommend Cascade vs. any other automatic dishwashing detergent brand, recommendations as part of co-marketing agreements
3. Cuisinart GR-4NP1 5-in-1 Griddler, 13.5″(L) x 11.5″(W) x 7.12″(H), Silver With Silver/Black Dials
5-in-1 countertop unit works as a contact grill, panini press, full grill, full griddle and half grill/half griddle. Dimensions: 13.50 L x 11.50 W x 7.12 H inches
Brushed stainless-steel housing; sturdy panini-style handle; floating cover to adjust to thickness of food. BPA Free
Removable and reversible 11″ x 9″ dishwasher-safe nonstick cooking plates drain grease for healthy cooking into the integrated drip tray.
Adjustable temperature controls with indicator lights; gourmet recipes and scraping tool included
Please refer to the Product Video and the User Manual before use.
Finish Quantum Scrubs, Degreases, and Shines. Because There’s Clean. Then There’s so Clean It Shines
3 Separate Fast Dissolving Chambers, Delivering 3 Different Power Actions
Powder: Scrubbing Power to Break Down & Remove Toughest Stuck on Food in One Wash. No need to pre-rinse or soak! Cuts through grease, breaks down & lifts away even 24-hour burnt, dried on food
Gel: Grease Cutting Power Handles Even the Toughest Messes
Liquid Powerball: Filled With Power Actions That Dry and Deliver a Finishing Boost of Shine
As the manufacturer of Finish, we’re here to support your shopping experience! You can call, or visit us on social for 24/7 support
5. Affresh W10549851 Dishwasher Cleaner 6 Tablets Formulated to Clean Inside All Machine Models, Count
Cascade Platinum ActionPacs dishwasher detergent has 50% more cleaning power* and even works in the quick wash cycle (*%cleaning ingredients vs Cascade Complete ActionPacs)
Dissolves fast and release the grease-fighting power of Dawn, while food-seeking enzymes latch on and break down food into particles so small they can flow right down the drain
Powerful enough to clean 24-hour stuck-on food
Convenient, premeasured ActionPac with no finicky wrapping. Phosphate free
Use with Cascade Power Dry Rinse Aid and Cascade Dishwasher Cleaner for our best clean
Save up to 15 gallons of water per dishwasher load when you skip the pre-wash and run your dishwasher with Cascade Platinum
#1 Recommended Brand in North America* *More dishwasher brands in North America recommend Cascade vs. any other automatic dishwashing detergent brand, recommendations as part of co-marketing agreements
7. Finish Jet-Dry Rinse Aid, Dishwasher Rinse Agent and Drying Agent, 23 fl oz, Packaging may vary
Simply fill your rinse aid dispenser with Finish Jet-Dry Rinse Aid and it will be automatically released in the rinse cycle every time your dishwasher runs.
Available in the following scents: Liquid Original, Green Apple
As the manufacturer of Finish, we’re here to support your shopping experience. You can call, or visit us on social for 24 by 7 support
DEEP CLEANING: Our powerful sealer includes a super penetrator to access dense granite and marble.
REINFORCED PROTECTION: Our sealer protects against stains and damage from water, salt, and oil.
BREATHABLE: This formula allows water vapors to escape freely, preventing harmful moisture buildup.
MAXIMUM STAIN REPELLENCE: This sealer has 3 custom sealing molecules for 3 levels of penetration.
VERSATILE: Our sealer works on many countertops, like basalt, bluestone, concrete, and quartzite.
2. FILA STONEPLUS, Stone Enhancer Sealer, Ideal for All Natural Stone, Protects and Enriches the Color of Polished, Honed, Textured and Tumbled Natural Stone, Solvent Based, 1QT
Stone enhancer that enriches the color of polished, honed, textured and tumbled natural stone
Granite sealer.
Highlights the natural surface character.
Protects the surface from dirt, water and oil stains.
Enhances and intensifies the stone’s natural color with a matte finish.
Excellent protection for countertops, inlays and backsplashes.
Hides cracks on granite surfaces.
Why should you choose FILA? Because FILA products work. Used in the most prestigious architectural projects worldwide, FILA cleaners and sealers are recommended by more than 200 stone and tile manufacturers. Our DIY line, designed for savvy do-it-yourselfers, gives you the best, reliable surface cleaning and sealing solutions at your fingertips.
For use inside or out on a variety of surfaces including sanded grout, ceramic tile, porcelain tile, glazed tile, stucco, travertine, marble, slate, granite, terrazzo and more to protect against water, stains and slippage
Formula is oil and water resistant that creates an invisible barrier for protection
Covers up to 500 square feet per pint
Offers superior coverage, formulated to provide stain protection that is UV transparent and resists weather elements
Easy application and will not yellow, safe to use around food prep areas
4. Color Enhancer Sealer for All-Natural Stone and Pavers. Marble, Travertine, Limestone, Granite, Slate, Concrete, Grout, Brick, Block.
💎 HIGHLIGHT AND DARKEN the natural beauty and character of unsealed surfaces.
💎 REJUVENATES THE COLOR and improves the appearance of weathered surfaces.
💎 LONG LASTING, easy to apply, and is suitable for both interior and exterior use.
💎 HELPS SEALS OUT WATER but allows moisture vapor transmission.
💎 ALWAYS TEST FIRST made in the U.S.A.
5. 1 Gallon DOMINATOR Stone+ Gloss, Satin Finish Stone Sealer and Clay Brick Sealer (Wet Look), Professional Grade, Water Based, Color Enhancing, Easy Application
COLD WEATHER WARNING: Do not apply if temperature is expected to be below 50° for 48 hours before & after application. Keep a clean, WET LOOK, SATIN FINISH and improve the LONGEVITY of your outdoor stone, clay pavers, faux stone and travertine; not to be used on submerged surfaces. Textured surfaces will have a lower sheen.
PROTECTS against oil stains and other spills while providing the ultimate UV protection on surfaces including concrete pavers and decorative concrete.
Breathe easy when applying DOMINATOR STONE+ sealer due to NO HARSH ODOR and LOW VOCs (Volatile Organic Compounds) as so many reviews have noted.
Your money goes farther with this product! AMAZING COVERAGE RATE of 200 – 800 square feet per gallon (typically one coat), delivering long lasting protection.
EASY spray on application using our included Quick Start Guide and available How To Videos. Dries quickly in most weather; typically wait only 24 hours for heavy foot traffic.
6. Stone Care International Granite Sealer and Protector – 24 Ounce – for Stone Countertop
Microfiber Applicator Pads For Natural Stone & Marble: Durable, washable, reusable, reliable & long-lasting 5″ x 4″ x 1″ microfiber applicator pads that are soft and absorbent for a perfect finish every time.
Excellent Results On A Variety Of Surfaces: The microfiber sealant applicator ensures tile, marble, granite, natural stone, slate, travertine, & grout gets universal coverage for a longer lasting seal and works well for rough or uneven surfaces. Unlike other products on the market these sealer applicators don’t leave fibers behind which compromise overall finish and form factors giving an uneven coverage.
Excellent Applicator For A Variety Of Sealants: Including Elmer’s, Red Devil, Perma Tile, Laticrete, Black Diamond, and more. Increases the effectiveness of the sealant for granite & marble countertops, bathroom tiles & grout sealer.
Value 4 Pack: Always have the right pad for the job with this economical set of four. Maintain your stone surfaces and keep them waterproof for a lifetime to come.
Easy To Use: Apply your chosen sealer to the applicator pad & easily spread evenly over application area. Always follow the instructions on the sealant label. When finished rinse applicator pad thoroughly before the sealer dries into the fabric.
1. UJ Ramelson 6pc Complete Professional Wood Marking/Striking Carving Drawing Knife Set with Sliding Bevel and Mortise/Marking Gauge & Wing Compass with Carbide Scribe
SIX GREAT WOOD CARVING TOOLS IN EACH ORDER: 6-piece Complete Professional Wood Marking/Striking Carving Drawing Knife Set with Sliding Bevel and Mortise/Marking Gauge & Wing Compass with Carbide Scribe
MORTISE MARKING GAUGE: Single brass pin on side for use as a standard, heavy-duty marking gauge. Brass thumb-screw locking mechanism. Constructed from polished hardwood, quality made to prevent wear.
6-INCH WING COMPASS w/CARBIDE SCRIBER: This large, professional wing compass is for scribing arcs and circles, with an arced wing that helps to steady the legs in use, and with a locking screw on the arc to hold the legs firmly in position.
9-INCH Sliding Bevel: Heavy-duty , professional commercial-grade durable construction using steel, brass and solid hardwood. Blade is easily tightened and secured using the brass wing nut tightener. A handy tool for angle layouts with high accuracy.
THREE PROFESSIONAL-GRADE MARKING KNIFE & WOOD CHISEL SET: These are our premium quality UJ Ramelson Co 3-piece marking knife set featuring razor sharp edges at the perfect angle for marking wood.
2. Kattool Mortise Gauge, Ebony 6.4 inch Woodworking Scriber Marking Tools Adjustable Screw Type Scribing Tool
Woodworking marking gauge, total length of 6.4”, bpth sides of the beam have marking pins, available to drawing a single line or parallel lines on wood surface
Fence & Beam: Made from high-quality ebony wood & brass, has high hardness, smooth surface, lightweight, easy to hold and use
Thumbscrew, Sliding Bar & Others: made from brass, wear-resisting, pins: made from high-carbon steel, durable, sharp and will not rust
With the adjustable range of 0.24”—4.3”(6mm—110mm), this mortise marking gauge can meet your general use
Wood marking tool for both amateurs and professionals to do woodwork, mark lines on wood
3. Woodworking Marking Gauge, Ebony Mortise Square Gauge 6″ Sliding Mark Scraper with Brass Screw Type Adjustable Head Meter Carpentry Marker Measuring Tool
♥【High-Quality Material】- Premium Ebony & Refined Brass, Extra Solid, Durable And Rust Resistant, With Long Lifespan, Lightweight For Portable But Ergonomically Designed For Gripping! Can Be Used For a Long Time.
♥【Good Workmanship】- Woodworking marking gauge with great polishing technique, smooth surface, will not get you hurt when operating, help you get the job done in a short time.
♥【Sturdy & Precise】- The Sharp Tip Of Marking Nail And Smart Fixation Screw Will Make Your product More Sturdy And High Precision! Double Nail Modes Available.
♥【Adjustable & Multipurpose】- Mortise Gauge with the Large Adjusting Range 6 MM to 100 MM, It Can Help You Complete Many Kinds Of Woodwork Or Else! Fit For Amateur DIY And Pro Use And Mainly Used For Marking, Scribing, Laying Out Upon Various Joinery Or Other Woodwork!
♥【100% GUARANTEED LIFETIME WARRANTY】- If you are not satisfied for any reason, we will gladly replace or refund your purchase. We offer world-class customer service. Easy and risk-free.
4. Mortise Gauge Woodworking Marking Gauge Ebony Mortise Square Gauge 6.4 Inches Sliding Mark Scraper Marker Measuring Tool with Brass Screw Type Adjustable Head Meter Carpentry Carpenter Accessories
Multi purpose: this mortise gauge can draw straight lines on wood, with the large adjusting range, suitable for both amateur DIY and skilled carpenter to use, mainly applied for marking, scribing, laying out upon various joinery or other woodwork
Quality and firm material: our mortise gauge is made of sturdy ebony and brass, which are solid and with good hardness, durable and rust resistant, can serve for long time using, lightweight for carry out to work
About details: total length is approx. 164 mm/ 6.4 inches, with double-sided and three nails, can easily draw single and double lines, at the same time, the pointed tip and fixing screw will improve your work efficiency
Adjustable width: the width between the two needles of our marker measuring tool can be adjusted from 0.21 to 3.9 inches/ 5.5 to 100 mm, which can satisfy your general wood marking tool usage needs
Size detail: the mortise gauge measures approx. 6.4 x 2.2 x 3.1 inches/ 16.4 x 5.6 x 8 cm, with fine workmanship the woodworking marking gauge is well polished, smooth surface will not get you hurt when operating, help you get the job done in a short time
5. Adjustable Marking Gauge,Aluminum Alloy Scribing Mortise Gauge Woodworking Marking Gauge Double Head Mortise Gauge for Woodworking,Wood Marking
Made of Aluminum Alloy: Aluminum Alloy body, light weight, strong quality, resistant to corrosion, has long service life. Rounded edges, comfortable to handle, won’t scratch your hands. Package includes 1pc main woodworking scribe, 2pcs copper nuts, 2pcs straight scribers, 2pcs stainless steel marking rods.
Two Adjustable Rods: This Woodworking Scribe Gauge with 2 independently adjustable scribers, can scribe both sides of a mortice at once.
Wide Application: The Adjustable Marking Gauge can mark soft metal, wood, ceramic tile, etc. It is great for finding the exact center. Suitable for both amateur DIY and skilled carpenter to use, mainly applied for marking, scribing, laying out upon various joinery or other woodwork.
Easy to Operate: The nuts are thickened and the anti-slip teeth are added additionally. Easy to handle and ensures a good work performance and helps to improve efficiency. Both the ink refill and the scribing needle can be used in this scribe, you have multiple choices to help you complete the scribing perfectly.
Practical Tools: Equipped with two level bubbles, which can measure the level and also measure the angle of 45 degrees.The horizontal direction is clear at a glance, the workmanship is fine, and the practicability is strong.
6. Clarke Brothers Wheel Marking Gauge – Woodworking Marking Scriber Kit With 2 Replacement Cutters – Wood Marking Tools With Graduated Inch & MM Scale – Solid Metal Bar Wood Scribe Tool For Carpenter
✅ PATENT PENDING – SAVE TIME ON YOUR WOODWORKING TASKS with a high-end wheel marking gauge, which will help you lay out lines parallel to a flat wood surface with max precision and indicate exactly where wood needs to be cut.
✅ MAKE LINE MARKS WITH PRECISION: The super clear, laser engraved graduation marks on the bar are available in both metric and imperial versions up to 6”/150mm, for convenience in your woodworking projects.
✅ INVEST IN A MONEY SAVER MARKING WHEEL KIT: The 2 extra hardened Steel wheel cutters included add great value to your order. Eliminate the chances of wavering lines and complete your tasks faster and easier.
✅ USE YOUR WOODWORKING SCRIBE FOR YEARS: The 8″ long graduated bar is made of solid brass, Steel and aluminum alloy, corrosion-resistant. The non-marring brass face protects it from damage when not in use.
✅ ENJOY ONE-HANDED OPERATION: Fast and easy to use, this convenient marking gauge wheel will take all the fuss out of your woodworking cutting. Feeling perfectly balanced, our wood marking tool won’t strain your hand.
7. iGaging Mortise Gauge + Wheel Marking Gauge Micro-Adjust Precision Woodworking 1/32nd Inch & 1 mm Scale
Material: the blade of striking knife is made of manganese steel with faux mahogany handle, the knife edge is pointed and the handle is comfortable to hold, make it easy for you to use
Size: the blade length is 2.4 cm/ 0.94 inches and the handle is 11.5 cm/ 4.53 inches long, the total length is 13.9 cm/ 5.47 inches, easy to hold on for you
Wide use: the wood handle is sealed, and the blade is peaked; Dual bevel design is nice as it allows marking from either direction; This is a useful tool for a beginner’s tool box, to learn how to use a marking knife for more serious woodwork
Built to last: the marking knife blade is made from steel and comes pre-oiled for better strength and longevity; We recommend applying lubrication when uses (optional, not included); This dovetail marking knife comes peaked and can be additionally honed to make it more pointed
Cautious: the blade is pointed; Remember to protect it when not in use to avoid accidental injury; However, due to the artificial cutting in the production process, some products may not be very peaked, you can grind the knife to solve the problem
3. Clarke Brothers Marking Knife – Wood Marking Gauge – Premium Woodworking Tool with Double High Carbon Steel Blade – Top-Quality Design with Ultra-Sharp Blade – Beautiful Wooden Handle
PATENT PENDING – OPTIMAL SOLUTION: Creating unique and durable wooden pieces is easier with the Clarke Brothers marking knife! This practical woodworking tool can be used to scribe lines that are to be followed by a hand saw or chisel, allowing you to create beautiful woodworking joints and designs.
MADE TO LAST: Our stunning wood marking tool features a premium double-edged blade that you can use with both hands for a better grip, more precision and better control. The ultra-durable Carbon steel blade can be used on all sorts of wood, including hardwood such as cherry and ash.
PRACTICAL & RELIABLE TOOL: This wood scribe tool has a durable blade made with 100% high-quality carbon steel. It is very strong and durable, being a great accessory for edge retention that reduces the time required for edge maintenance. The added level of sharpness ensures more precision and accuracy when marking. The amazingly sharp edge will remain intact even after many uses.
SUPERB DESIGN: Our wood marking knife is not only very practical and durable, but also elegant and classic. It features a simple, vintage and exotic Padauk wood handle with our brand name and logo for more personality. The handle ensures a comfortable grip that allows you to mark wood easier and quicker.
FOR YOUR FRIENDS: Get this premium wood marking tool for yourself or as a thoughtful and elegant present for your family and friends. Surprise a great handyman or woodworker with a durable and long-lasting accessory that they will cherish forever.
4. KAKURI Kiridashi Knife Right Hand 18mm, Quality Razor Sharp Hand Forged Japanese Carbon Steel Blade Hammered Pattern for Woodworking, Marking, Wood Carving, Whittling, Made in JAPAN
JAPANESE KIRIDASHI MARKING KNIFE: Kiridashi Knife is a Japanese hand-forged utility knife for woodworking, bamboo craft, whittling, marking, deburring, pencil sharpening, paper cutting, leathercraft, and so on. The handy portable size is convenient for camping and outdoor as well. It is also used for bonsai (bonsai knife) and garden trees as a grafting tool in Japan.
BEAUTIFUL HAND-HAMMERED DESIGN: Non-slip body with a beautiful forged hammered pattern. Blacksmith hammers it one by one. You can use it for a lifetime by sharpening the blade. This is the ultimate knife for professional carpenters and DIYers alike to use for a long time.
RAZOR SHARP JAPANESE STEEL: Only Japanese high-grade steel is used. The blade is razor-sharp and durable, and you can restore the sharpness by sharpening with a whetstone. All KAKURI brand products are manufactured in Japan and handcrafted by Japanese professional craftsmen.
OFFICIAL ENGLISH INSTRUCTION: KAKURI Official English instruction is included.
PRODUCT SPECIFICATIONS: Made in Japan / Material: Japanese high carbon steel / Size: 0.7″×7.3″×0.1″ / Blade Width: 0.7″ (18 mm) / Cutting Width: 1.9″
5. Narex Dual Double Bevel Striking Marking Knife with Blade from Hardened Mn-V Steel Heat Treated to HRc 61 822301
Marking/striking knife is manufactured by small and highly respected edge tool maker in Czech Republic
Blade made from highly allowed Mn-V steel and heat treated to HRc 61
Blade is .125″ thick and .580″ wide
Double bevel sharpened at 20 degrees and tip ground to 55 degrees.
Blade length is 1.5″ long and handle is 5.25″ long, overall length is 6.75″
6. Clarke Brothers Wheel Marking Gauge – Woodworking Marking Scriber Kit With 2 Replacement Cutters – Wood Marking Tools With Graduated Inch & MM Scale – Solid Metal Bar Wood Scribe Tool For Carpenter
✅ PATENT PENDING – SAVE TIME ON YOUR WOODWORKING TASKS with a high-end wheel marking gauge, which will help you lay out lines parallel to a flat wood surface with max precision and indicate exactly where wood needs to be cut.
✅ MAKE LINE MARKS WITH PRECISION: The super clear, laser engraved graduation marks on the bar are available in both metric and imperial versions up to 6”/150mm, for convenience in your woodworking projects.
✅ INVEST IN A MONEY SAVER MARKING WHEEL KIT: The 2 extra hardened Steel wheel cutters included add great value to your order. Eliminate the chances of wavering lines and complete your tasks faster and easier.
✅ USE YOUR WOODWORKING SCRIBE FOR YEARS: The 8″ long graduated bar is made of solid brass, Steel and aluminum alloy, corrosion-resistant. The non-marring brass face protects it from damage when not in use.
✅ ENJOY ONE-HANDED OPERATION: Fast and easy to use, this convenient marking gauge wheel will take all the fuss out of your woodworking cutting. Feeling perfectly balanced, our wood marking tool won’t strain your hand.
7. KAKURI Kiridashi Knife Right Hand 12mm Curved, Quality Razor Sharp Hand Forged Japanese Carbon Steel Blade Hammered Pattern for Woodworking, Marking, Wood Carving, Whittling, Made in JAPAN
JAPANESE KIRIDASHI MARKING KNIFE: Kiridashi Knife is a Japanese hand-forged utility knife for woodworking, bamboo craft, whittling, marking, deburring, pencil sharpening, paper cutting, leathercraft, and so on. The handy portable size is convenient for camping and outdoor as well. It is also used for bonsai (bonsai knife) and garden trees as a grafting tool in Japan.
BEAUTIFUL HAND-HAMMERED DESIGN: Non-slip body with a beautiful forged hammered pattern. Blacksmith hammers it one by one. You can use it for a lifetime by sharpening the blade. This is the ultimate knife for professional carpenters and DIYers alike to use for a long time.
RAZOR SHARP JAPANESE STEEL: Only Japanese high-grade steel is used. The blade is razor-sharp and durable, and you can restore the sharpness by sharpening with a whetstone. All KAKURI brand products are manufactured in Japan and handcrafted by Japanese professional craftsmen.
OFFICIAL ENGLISH INSTRUCTION: KAKURI Official English instruction is included.
PRODUCT SPECIFICATIONS: Made in Japan / Material: Japanese high carbon steel / Size: 0.4″×7.1″×0.1″ / Blade Width: 0.4″ (12 mm) / Cutting Width: 1.9″