Includes PENPRESSXL Assembly & Disassembly Pen Press and DRILLCENT3 Pen Blank Drilling Centering Vise
DRILLCENT3 is used to drill through the exact center of pen blanks up to 1-3/4″ square; Includes (1) 2″ x 1/4″ scrap waste sleeve; Blank and drill are not included
PENPRESSXL is used to both assemble and disassemble pen parts on one easy to use tool; Acts as traditional pen press to press your pen parts together; Disassembly function provides invaluable way to take virtually any pen apart
PENPRESSXL included components: (1) press assembly with adjustment sled and handle, (6) disassembly rods, (1) spring-loaded stopper, 6″ of soft-grip tubing, (1) 7mm mechanism bushing for parts protection
The (6) PENPRESSXL disassembly rods handle nearly all tube diameters and parts configurations all of your pen making projects
2. WEN LA3040 Pen Press with Adjustable Assembly Rod and 30-Pound Pressing Pressure
This deluxe pen press allows for rapid, accurate and hassle-free assembly of pen components into the finished product. This unit will accept any pen size as well as other turned projects such as letter openers, pepper mills, bottle stoppers, ice cream scoops, pizza cutters, and more.
Aluminum plunger head and polypropylene stop will not damage parts when force is applied
Plunger has a travel of 1-3/16” and exerts a full 30 pounds of pressure
The stop is adjustable with a quick turn of the large star knob. Unit can assemble parts up to 6-3/4” long.
Made from all steel components on a thick anodized aluminum base. Base is 3” wide by 16” long.
5. Taytools 469003 Deluxe Pen Blank Centering Drill Press Vise, Jaws open to 2-3/8 Inches, Will Drill Center of Blanks Up to 1-7/8 Inch Square
This self-centering pen blank vise allows you to firmly secure pen blanks and drill the exact center every time
Jaws open to a full 2-3/8” and will drill the middle of square blanks on the diagonal up to 1-7/8” square, making it useful for more than just pen blanks
The jaws on the drilling vice open and close together in a synchronized fashion to insure drilling in the precise center of blanks
The 1/2” thick anodized aluminum jaws are attached to hardwood base
The base include a groove for a sacrificial blank to protect the base when drilling all the way through blanks
Assemble and disassemble pen parts on one easy to use tool; Acts as traditional pen press to press your pen parts together; Disassembly function provides invaluable way to take virtually any pen apart
Included components: (1) press assembly with adjustment sled and handle, (6) disassembly rods, (1) spring-loaded stopper, 6″ of soft-grip tubing, (1) 7mm mechanism bushing for parts protection
Provides 250 lbs of pressure; Spring-loaded ram acts as a 3rd hand for quick, easy parts positioning; Sled mechanism slides the stop into position; Locking lever then securely locks the rod in place
The (6) disassembly rods handle nearly all tube diameters and parts configurations, including pen tips and clips; Dedicated 7mm bushing allows for disassembly of any 7mm pen; Soft-grip tube and V-profile clamp provides parts protection during disassembly process
Assemble your pen making parts together directly on your lathe with this standalone press
Requires a #2 morse taper opening on your lathe’s headstock and tailstock spindle
Headstock end part is spring-loaded with hard plastic to protect pen components
Center hole on the plastic face to secure the pen nib while pressure is being exterted from the tailstock end
Ideal for most penturning and woodturning projects that require parts to be pressed togther; Maximum workpiece length depends on your lathe’s distance between centers