Skip to content
1. Little Giant WRSC-6 Compact Drainosaur Tank and Sump Pump Combination System, Black
Pre-assembled for easy installation
3-1/2 Gallon tank size
Includes two 1-1/2-Inch MNPT x 2-Inch slip adapters for inlet and discharge
Includes one 2-Inch MNPT x 1-1/2-Inch slip adapter for vent
Cylindrical polypropylene tank
2. BURCAM 300514WHZ 1/3 HP Automatic Laundry Tub Pump, Black
1/3 HP AUTOMATIC LAUNDRY TUB PUMP: Designed for a maximum lift of 10′ (3. 0m) to handle normal waste water from domestic washing machines, bar sinks and all waste water not containing solids. Mounts directly to tail piece. Fits under wet bars, kitchenettes, vanities and utility sinks (complete self-contained unit).
LAUNDRY TUB PUMP: Automatic switch starts motor when water enters into the pump body. Allows sink installation without breaking concrete.
WATER PROOF DESIGN: 1/3 HP 115 V AC 60Hz Waterproof shroud protective cover to protect the pump from water damages.
PUMP CAPACITY: Capacity up to 1, 400 GPH. Maximum water temperature 60 degrees C (140 degrees F).
EASY TO INSTALL: No trap or inlet piping required. No vent connection required.
3. Barnes 131411 Model SU33LT Preassembled Laundry Tray Sump Pump System with SU33 Pump, For Residential or Commercial Plumbing, 1/3 HP, 120V, 42 GPM, 1-1/2″ NPT Discharge
SPLIT CAPACITOR MOTOR: For increased reliability, higher performance, longer motor life, great starting torque and lower amp draw
HIGH CAPACITY PUMPING: Large 1-1/2″ NPT discharge; Passes ½” spherical solids; 3450 RPM; Lifts water up to 30 feet
ROBUST DESIGN: Stainless steel shaft and hardware; Heavy duty industrial carbon/ceramic seal; Oil lubricated ball bearings
THERMAL PROTECTION: Automatic thermal overload protection prevents dangerous overheating and motor failure
LIMITED WARRANTY: Purchase includes a 24-month limited warranty
4. LTP-1 Hartell Laundry Tray Pump, W/2 Gallon Reservoir, 115 Volt, 1/4 HP 1-1/2″ Inlet 1″ Outlet
SNAP ACTION SWITCH, STRUCTURAL FOAM
POLYPROPYLENE RESERVOIR, SUDS PROOF RESERVOIR
INTEGRAL JUNCTION BOX 8′ CORD AND PLUG. UNITIZED CONSTRUCTION .
FITS INSIDE 24″ BASE CABINETS. FITS UNDER UTILITY SINKS.
ALLOWS SINK INSTALLATION WITH OUT BREAKING CONCRETE.
5. Simer 2925B Self-Contained Above-Floor Corrosion-Resistant Sump/Laundry Sink Pump, 1/4 HP, 115V, 1-1/2″ Discharge Pipe, Handles Solids Upto 1/8″, 6 Gallon Drainage Tank, Black
Compact contained sump pump
Easy under-sink installation
1-1/2″ Discharge pipe size
Handles solids up to 1/8″
horsepower is 1/4 HP
6. Superior Pump 92072 1/3 HP Pre-Assembled Submersible Remote Sink Drain Pump System
1/3 HP submersible thermoplastic sump pump, handles 3/8 inch solids, vertical float switch
Will handle temperatures up to 120 degree F
15-inch x 13.5-inch corrosion resistant structural foam basin with gasket sealed air tight cover
1-1/2 inch Inlet, 1-1/2 inch discharge, 1-1/2 inch vent and includes full flow check valve
7. BurCam 300514WH Laundry Tub Pump, Automatic Switch, 1/3 hp, 115V
Designed for a maximum lift of 10 feet to handle normal waste water from domestic washing machines , bar sinks and all waste water not containing solids
Designed for a permanent installation. To be installed directly under the tub strainer. Takes no floor space
Automatic switch starts motor when water enters in the pump body
No trap or inlet pipping required
No vent connection required.Max Head : 10 Feet
8. Zoeller 105-0001 Sump Pump, 12.50 x 14.50 x 14.50 inches, 19 Pound
Automatic, float operated mechanical switch 115V/1 Ph
1-1/2″ NPT discharge
9 ft. UL listed 3-wire cord and plug
1550 RPM, 60 Hz on 50 series models
Non-clogging vortex impeller
9. Liberty Pumps 405 Commercial 1/2 HP Drain Pump, one-size, Gray
Factory pre-assembled – Fully automatic operation
Quick Tree technology allows quick inspection and removal of float switch without disconnecting the plumbing
Oil-filled motor with thermal-overload protection
Package Dimensions: 18.0″ L x 18.0″ W x 21.0″ H
10. Red Lion 14942736 RL-SPS33 1/3 HP Under-Sink Sump Pump System with 6 Gallon Basin
1/3 HP sump pump
Engineered thermoplastic construction
6 gallon polypropylene basin
Pre-assembled water removal system
Up to 3200 GPH