Ensure accurate and reliable drip system performance with this all-in-one faucet to drip irrigation connection kit. Connect your drip irrigation system to your water supply, keep out debris with a filter, maintain optimally low flow water pressure, and prevent dirt backflow all with a single pre-assembled unit.
Connect ½” tubing to any standard ¾” male outside faucet, hose bibb, spigot, garden hose or sprinkler manifold in seconds for an easy fit. Leakproof connector is compatible with any 1/2″ tubing sizes .520 to .620 ID (inner diameter) including Rain Bird and Dig.
Kit contains a drip irrigation backflow preventer, 150 mesh filter, top-quality Senninger 25 PSI pressure regulator valve, already put together and ready to use immediately.
Don’t settle for leaks and blowouts. Our durable assembly contains only the highest-quality parts to ensure properly functioning, precise and consistent pressure reduction and backflow prevention. Senninger 25 PSI pressure reducer is 100% water tested for accuracy and known worldwide for its reliable performance.
Save money and time buying everything you need at once. Jumpstart your drip irrigation installation with this set of essential components for building a maintenance-free drip system. Ideal for use with raised garden beds, residential, farm, greenhouse gardening and agricultural watering applications.
Ideal for installations requiring lower flows such as solid set, drip line, soaker hose and other low pressure agriculture, residential and commercial irrigation. This PRLG (Pressure Regulator Landscape Grade) maintains a constant outlet pressure of 25 PSI (1.72 bar) with a flow range between 0.5 – 7 GPM (114 – 1590 L/hr).
100% water tested for accuracy. Senninger pressure regulators are built to rigorous quality standards and are known worldwide for their reliable performance.
Proper use of this low flow water regulator maintains sprinkler or droplet flow, distribution uniformity, and the overall efficiency of an irrigation system. It also helps conserve water and energy and extend sprinkler and drip system life in your garden or nursery. Works with any standard 3/4″ outdoor faucet, hose bib, garden hose, water hose, sprinkler manifold, garden soaker hose or home irrigation system.
Made in the USA of engineering-grade thermoplastics. This sturdy inline plastic water regulator can be installed above or below ground. No external metal parts for excellent corrosion resistance.
Note: This irrigation pressure regulator regulates dynamic water pressure (the pressure while water is flowing). If measuring this regulator with a pressure gauge, do not screw the gauge directly onto the end of the regulator. This blocks the flow of water and measures static pressure, not dynamic pressure. To measure dynamic water pressure, attach a gauge at the end of your irrigation tubing line, or use an inline gauge that allows water to flow unblocked through the regulator.
3. Flantor Garden Irrigation System, 1/4″ Blank Distribution Tubing Watering Drip Kit/DIY Saving Water Automatic Irrigation Equipment Set for Garden Greenhouse, Flower Bed,Patio,Lawn
UPGRADE IRRIGATION SYSTEM: Water all your plants at one time with 40M + 3M Hose irrigation tubing. The new design 3×6-Way connector can divide the water up to 12 tributaries, effectively increases the water pressure, perfectly solves the problem of lack of water.
SAVE WATER AND TIME: Compared with manual watering, garden drip irrigation system can save up to 70% of water, precision watering system delivers just the right amount of water slowly and precisely right where your plant needs it at the root zone.
WATERING CUSTOMIZATION: Every nozzle/dripper could be adjusted individually, and the nozzle has two spraying modes, columnar and foggy, and you can adjust the nozzle according to your needs, to precisely customized watering for each plant.
EASY TO INSTALL: Simple installation without digging or plumbing skills, simply insert the fittings and droppers, you can begin watering your plants instantly. TIPS:Soaking the end of the tubing in hot water for a minute before pushing the fittings on. It will be easier and as it cools down the tube will stay tight.
WIDE APPLICATIONS: Automatic irrigation kit is great for atomization, lawn irrigation, patios, roof cooling, agriculture, vegetable, greenhouse, flower bed, swimming pool misting fog cooling irrigation etc.
5. Drip Irrigation for Every Landscape and All Climates: Helping Your Garden Flourish, While Conserving Water!
6. Habitech 3-Pack 1/2 Inch Drip Irrigation Tubing to Faucet/Garden Hose Adapter – Reusable Connector Fittings for Most Rain Bird, Orbit, Dig, Toro 1/2 or 5/8 Tubing x 3/4″ FHT
Easy To Use: Easily connect 1/2″ drip irrigation tubing to any standard 3/4″ faucet, hose bibb or garden hose. Just insert and twist, no special tools needed. Each swivel irrigation fitting includes a pre-installed rubber washer to guarantee a water-tight seal.
Stress-Free Fit: Our irrigation faucet adapter connection works with the widest range of half inch tubing, from .520 to .620″ Inside Diamater, .620 to .710” Outside Diameter and .045 to .055 Wall Thickness. Please make sure your tubing specifications fall within these ranges for the proper fit. Compatible with many models of Rainbird, Orbit, Dig, Hunter and Toro tubing as well as generic 1/2″ blank drip irrigation tube or drip line. Large fitting ID means less flow restriction.
Zero Leaks: Barb design ensures tubing will not slip out or blow off at high pressure and temperature. No slippage or leaking, even under high pressure.
Reusable & Long Lasting: Unlike other types of fittings, these parts are reusable and may be removed and reinstalled for a long, versatile life. Simply loosen nut to remove tubing. Durable construction provides years of reliable use.
Patented Locking Technology: Quickly revolutionizing irrigation fitting expectations worldwide, the patented locking technology works great under high pressures and around heavy foot traffic. A more rugged alternative to insert and compression fittings, these adaptors have a locking mechanism that is easily tightened after the drip line is pushed on.
7. Rain Drip 100050211 Black Raindrip 016010T 1/4-Inch by 100-Feet Tubing, 1
Create a feeder line that supplies water to a low-flow, drip-watering device, or use as a main line in a small drip irrigation system; for trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets
Tubing outside diameter (OD) is 0.250 in., internal diameter (ID) is 0.170. in.; connect to main supply line with ¼ in. micro fitting such as a barbed connector, connect other end directly to emitter to deliver water to plant
As part of a complete drip irrigation system, the supply tubing transports water to the area to be irrigated; Tubing coil comes shrink wrapped for convenience; easy to access as needed
Poly tubing is constructed using a layering method for durability: the outer layer, which is exposed to the sun, and the inner layer, which is exposed to water, is made of 100% virgin content; the middle layer is composed of recycled content
Comes with one 100 ft. coil of ¼ in. poly supply tubing; Works with Raindrip products and other products with compatible connection type
8. URATOT 40 Pieces Drip Irrigation Fittings Kit 1/2″ Tubing Set, 10 Tees, 10 Couplings, 10 Elbows and 10 End Cap Plugs Drip Irrigation Barbed Connectors for Drip Sprinkler Systems
Quantity: a preferential suit contains 10 tees, 10 couplings, 10 elbows and 10 end cap plugs, enough for connecting drip irrigation fittings
Compatible for most 1/2 inch pipes: used for most of 1/2 inch drip irrigation pipes and it is approximately 520 ID range; please check the size to ensure it is proper before purchase
High quality material: made of environment-friendly and durable high impact plastic with anti-ultraviolet feature; the durable material is strong enough to bear overused pressure
Easy to install: no glue, tools or fixtures required, you just need to insert the pipe into the connectors tightly; note, the heated end hose pipe is contribute to install the fittings
Plastic drip irrigation fittings set: served for connecting, distributing water, making a turn, and controlling the end; start your drip irrigation installation with this basic fittings to create a maintenance-free drip irrigation system
9. Axe Sickle Set of 50 Drip Emitters Perfect for 4mm / 7mm Tube, Adjustable 360 Degree Water Flow Drip Irrigation System for Watering System.
Total length: 5.2 inches / 13cm; water outlet hole diameter: 0.05 inch / 1.4mm. Irrigation angle: 360 degree Suitable for 4/7mm (Inner/Outer diameter) tube. Each dripper has 8 outlet holes at the top.
Make sure the hose is softened before connecting, you soak end of 1/4″ tubing in VERY hot water before attaching to the dripper, A firm push with a little added wiggling gets the hose on with sprinkler.
Directs water exactly where you need it in a wide variety of planting areas Applies water similar to a spray head on an underground system for pots, tubs, ground cover, landscaped gardens and Etc…
Adjustable Water Flow: Water flow can be adjustable by rotating the water outlet hole cap. Adjust the amount of water according to actual needs, let your plant grow healthily, save water resources and save money.
10. Rain Bird T63-500S Drip Irrigation 1/2″ (.630″ OD) Blank Distribution Tubing, 500′ Roll, Black
