Top 7 Best blinds for crank out windows (2022)

1. Prime-Line H 3715 Tee Handle Crank with 3/8-Inch Bore, White, (Pack of 2)

  • Features a 3/8-inch inside diameter; for use with 3/8-inch outside diameter splines
  • Mounts secure over 3/8-inch splines with tightening of set screw
  • White painted finish
  • Diecast construction
  • Used with crank out casement operators manufactured with 3/8-inch splines

2. Flyzzz DIY Self-Adhesive Window Screen Netting Mesh Curtain, 100X150cm (Approach 39.37×59.05 Inches), with Hook and Sticky Tape, Fitted to Multiple Windows (1 Pack, White)

  • Size: 100x150cm (About 39.37×59.02 Inches),Can be easily cut down to size and fitted to multiple windows, stick the self-adhesive tape to the window frame place the netting over and cut off any excess. Done!!
  • Transparent Screen Mesh with Hexagon Hole, Made of 100% Polyester. Easy to fit and remove. Leave your windows open and enjoy fresh cooler air.
  • With self-adhesive sticky tape on the back of the frame. The soft net fabric sticks to the barbed side incredibly well, so it’s difficult to pull off and stays taut.
  • Fantastic Replacment Window Screen, the diameter of the holes very tiny, small. Super Transparent, white net is invisible across the window; it doesn’t reduce the room’s light or make it look ugly .
  • We offer you 100% satisfication guarantee and 24 hours service, If you’re not completely satisfied with your purchase simply let us know and you’ll be offered a full refund or replacement.

3. Daisypower Portable Air Conditioner Window Kit, Adjustable Seal Panels for Portable AC Hose with 5.9″ Diameter, Window Vent Kit for Sliding Windows

  • 【SPECIAL DESIGN】Window seal kit design to seal window gap, keep out hot air in summer, keep your room cool for longer and save electricity bill
  • 【WIDELY APPLICATION】Compatible with all portable air conditioners with 5.9″ diameter exhaust hoses.
  • 【BIRD STOP GUARD】Bird guard help prevent birds and fallen leaves from entering the air conditioner through the exhaust hose,causing parts damage
  • 【WINDOW REQUIREMENTS】Adjustable Window kit can be freely adjusted in length. Maximum adjustable length 47″,suitable for slide window and hung window.
  • 【PACKAGE】3 piece Window Seal Plates,1 piece 5 inches Bird guard, 6 screws, 1 instruction sheet

4. Park Ridge Products VBSI3214PR Window, 32″ x 14″, White

  • Park Ridge Products basement slider window is the perfect choice for your new construction or remodeling needs
  • Park Ridge Products basement slider window is manufactured with a heavy duty extruded welded vinyl sash and main Frame
  • The sash glides effortlessly, interlocking with the main Frame ensuring a weather tight seal
  • Insulated glass and durable wool pile seals Keep cold air out and warm air in
  • Included is an easily removable Full screen to Keep insects out.This is an aftermarket of generic part

5. Redi Shade Original Light Filtering Pleated Fabric Shade, 36 in x 72 in, White

  • Trim at home for the perfect fit inside or outside your window frame, then install in seconds without a drill, screws, or brackets — No Tools needed
  • Softly filters light for privacy, light control and UV protection — made of non-woven polyester fabric
  • No cords for a clean look and child safety — use included clips to raise and lower shade
  • Works as a stand-alone solution, or easily layer behind existing window treatments
  • Perfect solution for: home, apartment, dorm, moving, remodeling, RV/camper/houseboat

6. Slide-Co 173553 Andersen Tee Crank Handle, 3/8 in. Bore, Diecast Construction, Stone,2

  • This casement operator tee handle replaces swivel style cranks that interfere with window blinds. It is designed for use on older Andersen windows
  • Fits 3/8 in. Andersen casement operator splines
  • Finished in a stone-colored paint
  • Constructed of zinc diecast

7. Prime-Line TH 22253 – Folding Crank Handle for 11/32” Spindle Casement and Awning Window Operators – Low-Profile Design for Unobstructed Use of Blinds– Diecast Zinc, White Enamel Finish, 1 Handle

  • FITS 11/32” SPINDLES – Prime-Line folding crank handle is designed to fit 11/32” Truth brand operator spindles. It has a 2-9/64” reach with a 3-3/32” projection.
  • LOW-PROFILE DESIGN – The unique design of the casement and awning window crank allows it to fold down when not in use, making it exceptionally low-profile. Shades, blinds, shutters and more can go straight down to the window sill without getting caught on the handle.
  • USES LESS TORQUE – The TH 22253 crank features a set screw at the base of the handle allowing it to lock onto the spindle, and a swivel knob at the tip for ease of operation. It requires far less torque than traditional low-profile handles.
  • CORROSION-RESISTANT – Prime-Line window operator folding crank is constructed of diecast zinc with a baked-on white enamel finish. It is engineered to resist rust and corrosion.
  • EASY TO INSTALL – The non-handed window operator folding crank is extremely easy to install and all mounting hardware is included.

Leave a Comment