Skip to content
1. Lenox – 29232CLB72360 Classic Tuff Tooth Band Saw Blade, Bimetal, Regular Tooth, Wavy Set, Positive Rake, 93″ Length, 3/4″ Width, 0.035″ Thick, 18 TPI
Tuff tooth design reduces tooth strippage
Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals
Good for cuts in cylindrical solids, rectangular tubes, and structural shapes
Wavy tooth set helps prevent stripping for cutting thin workpieces
M-42 high-speed steel tooth edge for heat and wear resistance
2. Carter Products QR1000 Quick Release Band Saw Blade Tension Toggle
Available for Jet and Delta 14″ band saws
Instantly relieve tension to prevent damage to band saw tire and prolong band saw blade life
Pre-tension blade slightly during blade changes for easier adjustment
Installs in minutes and includes all hardware
Built to last with solid steel construction
3. DEWALT Portable Band Saw Blade, 32-7/8-Inch, .020-Inch, 24 TPI, 3-Pack (DW3984C)
Matrix II high speed steel edge of the band saw blade is designed for heat and wear resistance
8% Cobalt Content For Added Durability & Wear
Rc 65-67 Tooth Hardness For Increased Wear Resistance
Alloy Steel Backer for Fatigue Resistance
4. BOSCH BS62-18MD 62 x 3/8 x 18T Metal Bandsaw Blade
18 TPI metal-cutting band saw blade.
Designed for use in many standard stationary band saws.
Optimized tooth geometry for applications in ferrous and non-ferrous metals.
Bi-Metal blade construction for long life performance.
Precision sharpened teeth for clean, accurate cuts.
5. New Complete Guide to Band Saws: Everything You Need to Know About the Most Important Saw in the Shop (Fox Chapel Publishing) How to Choose, Setup, Use, & Maintain Your Band Saw, plus Troubleshooting
6. Imachinist S933414 M42 93″ X 3/4″ X 10/14tpi Bi-Metal Metal Cutting Band Saw Blades
Bi-metal type, 93″ long, 3/4″ wide, 10/14tpi teeth profile
Perfect for soft metal
10/14tpi is suitable for cutting thin pipe tube profiles etc
10/14TPI is variable teeth, big teeth distance is 2.54mm per teeth, small teeth distance is 1.8mm per teeth
Suits all bandsaws which uses 93″ long, 3/4″ wide bandsaw blade
7. POWERTEC 13104 59-1/2″ x 3/8″ x 18 TPI Band Saw Blade, for Sears, B&D, Ryobi, Delta, and Skil 9″ Bandsaw
INCLUDES: 59 ½ inch band saw blade (one piece) – suitable for most 59-1/2” long, 3/8” wide, 0. 014” thick, band saw blades
QUALITY: The band saw blade is made from premium, high grade carbon steel with heat resistance and weld
DESIGN: This precision cutting tool is constructed with an optimal geometric tooth arrangement that provides seamless cutting results at high performance speeds
APPLICATION: Flexible carbon hard edge blade works perfectly with hard and soft woods, plastic, and plus non-ferrous metals
TEETH SPECS: 18tpi blade has a raker set / regular teeth profile
8. Olson Saw AC70010 Saw Blade Lubricant Stick Stone for Band Saw Blades
Prolongs blade life and produces smoother and quicker cuts
Keeps metal, plastic and wood cutting blades from clogging with wood chips or pitch
For power and hand held cutting tools including band, scroll, circular, hack and jewelers saw blades
This wax stick is specially formulated to keep metal, plastic, and wood cutting blades from clogging because of chips or pitch.
Push stick into moving saw blade so that teeth are thoroughly coated.
The wax will flow when saw blade becomes warm, keep the blade clean and prevent clogging.
This adds to the life of the blade and produces easier, smoother and quicker cuts.
If using Cool Blocks replacement band saw blade guides apply lubricant stick only to tooth tips.
Made in USA.
9. DEWALT Portable Band Saw Blade, 32-7/8-Inch, .020-Inch, 18 TPI, 3-Pack (DW3983C)
Matrix II high speed steel edge of the band saw blade is designed for heat and wear resistance
8% Cobalt Content For Added Durability & Wear
Rc 65-67 Tooth Hardness For Increased Wear Resistance
Alloy Steel Backer for Fatigue Resistance
10. DEWALT Portable Band Saw Blade, 44-7/8-Inch, .020-Inch, 24 TPI, 3-Pack (DW3984)
Matrix II high speed steel edge of the band saw blade is designed for heat and wear resistance
8% Cobalt Content For Added Durability & Wear
Rc 65-67 Tooth Hardness For Increased Wear Resistance
Alloy Steel Backer for Fatigue Resistance
Matrix II high speed steel edge for heat and wear resistance
8 percent cobalt content for added durability and wear
Rc 65-67 tooth hardness for increased wear resistance
Alloy steel backer for fatigue resistance